Showing posts with label felt. Show all posts
Showing posts with label felt. Show all posts

Wednesday, May 28, 2014

Transform Stickers to Create Reusable, On-the-Go Activities


My house currently looks like every sticker in the world exploded ALL over it! I'm constantly pulling wads of wet stickers out of my laundry, scraping them off of floors and furniture and finding them on my clothing as I walk into work. Needless to say, we go through A LOT of stickers in my household, and I've been dying to figure out a way to hold on to some of the cute stickers we purchase and not have to spend my entire life unsticking them! As it turned out, the solution was simple!



Using my handy dandy Purple Cow laminator (which I am completely obsessed with), I laminated the stickers and cut them out, leaving a small border of laminate around each. I then placed a small piece of rough Velcro on the backs of the stickers. In case you weren't already aware, rough Velcro sticks to felt beautifully! With that being said, I placed the laminated stickers onto various colors of felt sheets, which I jazzed up a tiny bit to match the theme of the stickers. Oh, and PS-Michael's has a HUGE and inexpensive variety of licensed character stickers, which are very popular in my household! Also, The Dollar Tree just started selling some super cute Very Hungry Caterpillar stickers, which I was super pumped to make reusable (love me some Eric Carle)!


And there you have it, folks! Simply fold up the felt and pack it and the reusable stickers in a baggie to bring with you when you need it the most!

Sunday, February 16, 2014

Mickey Mouse Gift Bucket

My sweet nephew, Royce is obsessed (actually...what do you call the level beyond obsessed??? He's that!) with Mickey Mouse and the entire Clubhouse gang, so I knew I would need to theme his birthday gift accordingly. After purchasing Mickey-themed letters to spell his name and making him a Toodles pillow, I just needed a container in which to put these gifts. I found a cute, red bucket at the Dollar Tree and jazzed it up using felt and a low-temp, glue gun to make a personalized, Mickey Mouse gift container that can be used again and again! I'm also including a printable for you to use to make one of your very own. Here's how...

Materials

-red bucket
-straight pins
-yellow, black and white felt sheets
-fabric scissors
-low-temp glue gun-glue sticks
-adhesive felt letters
Instructions

1. Print out template, cut out shapes and pin to coordinating felt sheets

2. Using a low-temp glue gun, glue buttons to the middle of the bucket, about an inch apart.
3. Glue feet to the bottom of the bucket so that they are sticking out about 3" beyond the bucket
4. Glue ears to top of bucket so that 3-4" of felt stick up above the bucket
5. Adhere letters to top rim of bucket. Using a black, permanent marker, draw four "button holes" in the middle of each button.

From start to finish, this project took me about 20 minutes. How awesome is that?!?! Enjoy!

Tuesday, October 22, 2013

Infant Owl Costume

 
As cute as Halloween costumes for babies are, I have a hard time being willing to spend exorbitant amounts of money on them, when they only fit for 1-2 wears and runs the risk of being spit, peed, and pooped upon at any given time. I love owls (much like everyone else) and wanted to turn my little munchkin into one for Halloween last year, but wanted to keep my budget to a minimum. Using a white hat, onesie, tights, felt, my handy dandy glue gun, and a small, fleece blanket purchased at my local dollar store, I was able to do exactly that (in fact, since I had the tights, hat, shoes and some of the felt on hand, the whole sha-bang cost me about $5!)
Here's how...
 


 
Materials:
 
-white, long-sleeved onesie
-white baby tights
-white baby hat
-RIT dye in brown
-felt sheets (2 of each of the following colors-orange, bright blue, bright green, bright pink, orange, brown)
-small, fleece blanket
-glue gun and glue sticks
 
Instructions:
 
1. Dye hat, onesie and tights according to RIT package directions (be SURE to follow the directions to a tee, or I assure you it will not dye evenly!). Wash and dry according to package directions.
 
2. Cut out leaf shapes in all colors of felt (enough to cover the front of the onesie)
 
 
3. Beginning with the bottom of the onesie (near the fasteners), alternate leaf shapes (aka-"feathers," according to color, creating three across (refer to picture above as a reference).
 
4. Hot glue the tops of the feathers to the bottom of the onesie
 
5. Glue a row of four feathers above the original row, overlapping them slightly. Continue to glue rows of feathers on top of each other, adding feathers across as needed, until reaching the neckline of the onesie.
 
6. Cut the fleece blanket in half diagonally (making 2 triangles) and glue the long side of the triangle across the arms of the onesie
 
7. Cut out six circles-2 pink (large), 2 green (medium) and 2 brown (small with triangle cut out for the pupil) for the eyes and glue to the hat
 
8. Using leftover pieces of the blanket, make two bows and adhere to the hat.
 
9. Cut a triangular piece of orange felt and glue to the hat for the owl's beak
 
 











Sunday, July 28, 2013

Quiet Book

Due to my overabundance of felt and love for quiet books (not to mention, quiet!), I decided it was time Claire got her very own quiet book. While she's only one and can only seem to manipulate the pieces into her mouth (she is heavily supervised when using this book, by the way, so not to worry!"), I know it will come in handy for many of the activities where her noisy, rolly, crazy days just aren't acceptable!


Front and inside cover complete with giant pocket to store all the pieces.

Page 1-gumball machine with felt gumballs; Page 2-flower and petals

Page 3-Ice cream cone and scoops; Page 4-Animal beads on ribbon to practice counting and fine motor skills

Page 5-Tree with multi-colored leaves; Page 6-fish tank with felt fishies to practice color recognition



Saturday, July 6, 2013

Despicable Me Minion Popcorn Bucket

In celebration of Despicable Me 2, in theatres NOW, and the return of the MINIONS (who...in my humble opinion, are some of the best characters ever created), I've created a bucket resembling these adorable creatures to use for movie theatre popcorn, snacks, or simply to shovel sand on the beach. Whatever your mischievous little heart desires...

Materials:

-yellow, sand pail (I found mine at Michael's for a little over $1...Whoop!)
-felt (white, black, gray, red, and brown)-one sheet of each color is plenty and scraps will suffice for the red
 and brown parts if you've got 'em!)
-low-temp glue gun and glue sticks

Template:
(be sure to expand picture to 8.5"x11" size for correct sizing)



How-To:

1. Use templates above to cut out felt shapes in colors designated.
2. Determine which side of the pail you wish for the face of the minion to be and glue the white circle
    (eyeball) in the center of the side chosen. Be sure to glue only the middle of the circle, as you'll need to
    place the goggle straps under each side of it.
3. Glue one of the goggle straps behind the eye on one side and around to the middle of the opposing side of
    the pail. Do the same on the opposite side so that the straps connect in the middle. Cut off excess if the
    straps overlap.
4. Place the gray felt (goggle) on top of the white circle and glue down entirely
5. Glue the brown circle in the middle of the white circle.
6. Glue the black circle in the middle of the brown circle.
7. Glue the red tongue to the bottom of the black mouth.
8. Glue the teeth along the top of the black mouth.
9. Glue the entire mouth to the bottom of the bucket.




Friday, April 5, 2013

Simple Superhero Cape Designs

The son of one of my co-workers recently had unexpected brain surgery to remove a benign (thank goodness) tumor on his brain. All of the reports that we received from my co-worker and his wife mentioned how unbelievably positive and brave their son was throughout the entire process and that he was, without a doubt, their hero. While shopping at Target one afternoon, I came across some superhero capes in the party favors section. I quickly snatched two of them and came home ready to carry out my plan (Mua ha ha ha!!!).

I used blue and yellow felt to cut out two large shapes (a diamond for one and an oval for the other) and some letters (SG for Super Gideon and SC for Super Corbin, Gideon's little brother, who I thought might also like one) and hot glued them to the capes. I found matching masks at my local party store and sent them off to their brave recipients.


Friday, March 22, 2013

How To: Toy Car Holder and Felt Road Roll Up




Here is a project I have been wanting to do for a while! My nephew, Royce turned one in September, and, while his motor skills may not quite be prepared to play with this to its fullest extent, I think its a gift he will love, not only now, but even more so down the road. It is certainly a gift I think his parents will appreciate, as its easily transportable and can be used in lots of different environments and situations. I have seen projects similar to this, but I wanted to fashion something that could hold a few more cars than what I had seen, along with a much bigger area in which to "drive." Here is how to make your own:

Materials:

-blue felt
-yellow felt
-sewing machine
-black felt
-double-sided, fusible web (I used Steam-a-Seam Lite)
-ironing board/iron
-green felt
-white felt
-brown felt scraps
-pinking shears
-scissors
-toy cars (7-8)
-craft glue
-8" elastic
-needle
-thread

Directions:

1. Cut out a piece of 18" x 36" blue felt
2. Using black felt, cut out pieces of road to adhere to blue felt (I cut out a piece at a time and placed it on the blue felt to determine how much space I had remaining for additional pieces)
3. Trace each piece of road onto fusible web. Cut out and adhere to road pieces. Align road pieces onto blue felt according to where you would like it to be permanently located
4. Set iron to "wool" setting and follow the directions of the fusible web to adhere road pieces permanently.
5. Cut out a 3" x 18" yellow felt piece and align on the bottom of the blue felt. Pin the yellow and blue felt pieces together along the edges
6. Sew along the edges where pinned.
7. Measure and pin every 2 1/2" of yellow felt. Sew 7 vertical stitches where pinned to form car pockets.



8. Cut out small, rectangular pieces of yellow felt to form the dashes on the road. Using craft glue, adhere felt.
9. Using pinking shears and scissors, cut green and brown felt to create trees and bushes. Adhere along the road and surrounding area using craft glue
10. Cut cloud shapes out of white felt and adhere using craft glue.




11. Using pinking shears, create a sun out of yellow felt. Adhere in top corner of blue felt using craft glue.
12. Allow about an hour for pieces to dry
13. Loop a 12" piece of elastic and hand stitch both ends to the bottom of the second pocket





14. Place toy cars into pockets, leaving the middle pocket empty



15. Fold the car holder/road in half vertically and roll toward the elastic strip



16. Stretch elastic around rolled felt piece





This project shared with the following awesome blogs and websites:

Tatertots and Jello, Be Different, Act Normal, Cheerios and Lattes, i heart nap time, Flamingo Toes, Skip to My Lou, Sew Can Do

Thursday, October 25, 2012

Despicable Me Minion Costume


c

My inspiration, courtesy of http://villains.wikia.com/wiki/The_Minions




If you know me at all, you know that my sewing skills are limited and that following any sort of pattern is beyond my attention span! Needless to say, I would love to give you the step-by-step directions to my Despicable Me minion Halloween costume last year, but I sort of cut and sewed as I went along. Sorry! I can tell you that I purchased 2 yards of yellow felt, one yard of blue felt, 1/4 yard of white felt, 1/4 yard of black felt, 1 small piece of gray felt, and 1 small piece of brown felt, along with craft glue, and a sewing machine. In the simplest terms, I folded my yellow felt in half and cut the sides and bottom to fit my body. I then cut out a "U" shape at the top of the fold so that the costume would fit over my head and sewed from the bottom of each side, leaving room for arm holes near the top. I turned the costume inside-out (fortunately, with felt, there is no right-side/wrong-side) and layed it out on a flat surface. Looking very carefully at Google images of minions, I cut out all of the necessary pieces to fashion the face, overalls, and accessories and used fabric glue to adhere them to the costume. Not too shabby for a "no directions, day-before-the-party I was attending" costume, haha!



Posing in the finished costume, along with some costumed cuties



Saturday, March 31, 2012

How To: Simple Baby Booties


Sweet little slippers for our upcoming arrival

Since I have FINALLY had some energy and free time this weekend (this whole developing a life inside of you thing is NO JOKE!), I decided I would do some crafting. Some crafting turned into a marathon day of gluing, painting, jewelry-making, photographing, brainstorming, organizing, sewing, you name it! All in all, my idea of a fabulous day!

My first project was finishing up the baby slippers I had started weeks and weeks ago. I have wanted so badly to make baby slippers similar to the ones my cousin, Kristin made for my nephew around Christmas time. After I found the pattern and instructions online (which I will happily share with all of you!), I got started with pinning and sewing and making a few of my own adaptations. Here is a great webpage that will take you through the process step-by-step and also includes a pattern for the slippers themselves.

Since I am not the most gifted hand-stitcher, I decided to match the thread I used to sew the slippers to the color of the fabric as best I could and create smaller stitches than those shown  in the instructions (in other words, the less people able to see my stitching, the better off we all are!). In addition, since I am having a girl and she will be the recipient of these slippers, I decided to sew ribbon along the upper edges of each pair of slippers to create a cute bow that could be tied in the front.


Black and gold slippers for baby girl to rock out during Steelers football season


Sweet little pink booties with white ribbon


Probably my favorite pair-gray felt slippers with purple ribbon.




Wednesday, November 30, 2011

Mickey Mouse Clubhouse Toodles Pillow


Derek's Toodles pillow-front view

Check out my Etsy Shop to purchase a Toodles pillow similar to the one shown!

When my sister-in-law, Jen asked me if I could make my nephew, Derek a Toodles pillow (based on the Mickey Mouse Clubhouse character), I immediately agreed that I would try. Little did she know, I had NO idea whether or not I could actually pull it off or how I would even begin! But, for Derek, I was sure willing to give it my all. I started by drawing out a Mickey head and ears on paper as a template then traced it onto two pieces of red felt. After cutting out the felt, I began to cut the pieces to be placed onto one piece of the red felt and (slowy but surely!) hand-stitched them on. I then cut out a half circle of red felt about the same size of  the head to create a pocket for Derek to put the extra pieces I would be making him into and pinned it to the red felt cutout opposite to the hand-stitched one. Placing the sides of the red felt that I wished to be the outside of the pillow together, I pinned the pieces and sewed along the edges, leaving about a 2 inch gap for stuffing. After turning the felt inside out, I stuffed it with Poly-fil and sewed the open edge shut. I then cut out purple, blue, green, and orange felt "wedges" that Derek would be able to manipulate on top of the Toodles pillow (You really must watch Mickey Mouse Clubhouse to truly appreciate all of Toodles' accessories). Using iron-on decals, I printed a picture for each wedge and ironed each on to complete my pillow. Needless to say, I was pleasantly surprised at how the pillow turned out and was so happy to see the joy on my nephew's face when he opened it! Mission accomplished!!!

Note: I have made an Etsy-version of this pillow for purchase. Please visit my page HERE!!!



Pocket view
 
Toodles "accessories" for Derek to manipulate


The grateful birthday boy giving me the "extra large" hug!



Tuesday, September 20, 2011

Bib Necklaces


This type of necklace throws a fashionable and cute spin on a typical piece of jewelry. Using a sheet of blue felt, I cut out the bib shape based on necklaces I had seen before (although I am including a cool template that could easily be used). I then glued the end of a piece of 9” gray ribbon to each side of the bib so that the necklace could be tied to wear. Using silver, fabric rosettes I had previously made, I placed the largest rosette in the middle of the bib, the medium sized rosettes on each side of that and the smaller rosettes by edges of the bib. I then embellished the remaining sections of the bib with gray, glass pearls and placed a gray pearl in the middle of each rosette. Now to find the perfect outfit to compliment this necklace!
Here is a template you can use to create an adorable bib necklace for yourself!

 

Wednesday, August 17, 2011

Brown Bear Felt Story Props



One of my favorite children’s books is Brown Bear, Brown Bear What Do You See? For my sister’s children’s book-themed baby shower (her third shower of four, haha!), there was no doubt in my mind that the book I would be bringing would be this one, but I also knew that the teacher/psycho crafty side of me had to add a little more. As a result, I used various colors of felt and permanent markers to re-create and cut out the animals and people from the book, as well as a large piece of stiffened felt that I folded in half to use as baby’s “follow along” book. The idea is for baby (or toddler, as a baby’s fine motor skills probably wouldn’t manipulate these pieces so well) to place each animal in the appropriate area of the book/felt board as the book is being read.
I cannot wait until this little man is old enough (and hopefully attentive enough) to have Brown Bear read to him and "follow along" with his own version of the book!