Showing posts with label ribbon. Show all posts
Showing posts with label ribbon. Show all posts

Saturday, November 1, 2014

Wedding Invitation Keepsake Ornament



With all of the weddings I have attended, I have a surplus of wedding invitations lying around that I can't bring myself to throw away. On the other hand, my house is cluttered enough, and I certainly don't know where I'll store them with the limited storage space we've got. Finally, it dawned on me (about 25 weddings too late)...I could give the invitations back to the bride and groom in the form of a keepsake ornament that they could hang up around Christmastime year after year. With my friends Sarah and Steve getting married this Saturday, I thought they'd be fantastic guinea pigs to receive the first edition of this gift! Here's how it's done...

Materials:

-wedding invitation
-scissors
-round pencil or pen
-clear, glass ornament
-ribbon
-lighter
-charms
-split ring




Instructions:

1. Cut invitation into thin strips so that there is one line of script per piece cut (refer to picture below). Since this particular invitation had cardstock 
    behind it, I decided to separate the cardstock from each of the strips and use them for added color inside of the ornament.


2. Using a rounded pencil or pen, curl each strip of paper tightly around it and slide off the pen or pencil to avoid unraveling



3. Place each of the "curls" inside of the glass ornament.


4. Cut about 8" of ribbon in a corresponding color and tie to the loop at the top of the ornament, creating a way to hang the ornament from a Christmas 
    tree. Fray the edges of the ribbon using a lighter.

5. Cut about 14" of ribbon and tie around the top of the ribbon, creating a bow in the center of the ornament. Trim off excess ribbon. Fray the edges of 
    the ribbon using a lighter.

6. Place the charms on a split ring and close the split ring around the center of the bow so that the charms dangle in the middle of the ornament for 
    added embellishment.

Here's to a lifetime of happiness and wedded bliss!!!

Wednesday, March 5, 2014

Button Shamrock Pin

Ok, seriously, how is it March already??? I literally closed my eyes and February was over; not that I'm complaining, because Mother Nature has not been kind to us here in Western PA, but wow! With that being said, let's get some St. Patty's Day craft-ness going! First up is this ridiculously simple and insanely cute shamrock pin made of buttons...

Materials:

-four, green buttons, approximately the  same size
-glue gun/glue sticks
-green ribbon, cut to about 4"
-flat-backed pins (typically sold in the jewelry-making sections of craft stores)

Instructions:

1. Glue together two buttons diagonally together as shown in the picture below
2. Glue on a third button (picture below)
3. Glue fourth button to the bottom of the shamrock
4. Glue flat part of the pin to the back of the buttons near the center
5. Fold ribbon in half and glue open ends together
6. Glue ribbon to bottom of buttons so that loop of the ribbon is shown as the stem of the shamrock. 
Warning...There WILL be glue gun strings! Use a hair dryer to get rid of any loose strings! Make a bunch of these and pass them out to co-workers, secretaries, neighbors, etc. So simple, but they'll love them! And, as always, send me pics of what you make!

Thursday, December 5, 2013

Clothespin Wreath and Christmas Card Holder

One of my favorite parts of the holiday season is receiving Christmas cards, particularly picture cards that allow me to see friends and family who are far away and admire how much their children have grown and changed from last year to this year. Unfortunately, after I'm done admiring these cards, they get shoved into a basket with a gazillion others, never to be seen or heard from again! Until now...Using washi tape (my new fave), clothespins and a wire, coat hanger, ribbon, and a lil' bling, I created a wreath that doubles as a Christmas card holder. 'Tis the season to be crafty!!!

Here's how you, too, can make one:

Materials:
  • Wire, clothes hanger
  • Needle-nosed pliers
  • Clothespins (I used a little over 60 of them)
  • Washi tape 
  • Scissors
  • Ribbon
  • Sticky-backed gems


Directions:

1. Place a piece of washi tape top across the flat side of a clothespin. Trim any excess at the ends of the clothespins.

2. Fold excess tape over the sides of the clothespins


3. Shape wire. Clothes hanger into circular shape. Use pliers if needed.

4. After all clothespins are covered, place them onto the open end of the wire hanger through the wire loop in the middle with the side of the clothespin that opens facing upward. I used two patterns of washi tape and alternated them amongst clothespins
5. Using pliers, bend the open end of the wire hanger inward and wrap around the other side. Add sticky-backed gems to the ends of every other clothespin.
6. Wrap ribbon around the ends of the wire hanger and hook. Tie a bow in the front.



HAPPY HOLIDAYS FROM HOYBY CRAFTS!!!!!


Saturday, November 16, 2013

Ribbon Turkey Vase

With turkey day fast approaching, I thought I'd add a little throwback project into the mix! While putting out Thanksgiving decorations, I came across this little gem I made a few years back for an online competition run by The Dollar Tree (2nd place, what what?!?!) using items found at their stores. The coolest part? The vase used as a base for this project gives this turkey a huge number of possibilities: add lights for extra sparkle, use it as a candy holder, the sky is the limit! Here's how to  make an adorable gobbler of your own:

Materials:





-scissors   
                                    
-1/2” width red ribbon spool
                      
-1 ½” width brown ribbon         

-glue gun and sticks
-1 ½“ width orange ribbon
-pipe cleaners                     
      
-large google eyes
-glass vase

Instructions:
 
1.    Wrap brown ribbon around the glass vase in a criss-cross fashion, adding dots of hot glue to secure

2.    Cut two “wings” out of brown ribbon and glue to the sides of the vase.

3.    Using the brown and orange ribbon, cut four feather shapes out of each color. Cut pipe cleaners to the length of the feathers and glue along the middle of each “feather” so that they are now sturdier and more flexible (the pipe cleaner side of the feather will be facing away from the turkey when pieced together)

4.     Fan out the brown and orange feathers and glue towards the opening of the vase on the side that you have designated to be the back of the turkey.

5.   Using the orange ribbon, cut off a 4” piece and fold in half without creasing. Glue the ends of the ribbon together to form the turkey’s “beak” and glue the opposing end of the ribbon to the front of the vase near the opening.
6.    Fold and glue red ribbon into “B” shape and glue beside the beak for the “gobbler”

7.    Glue google eyes toward the top of the vase




Sunday, April 7, 2013

Autism Awareness Puzzle Piece Wreath



April is Autism Awareness Month! As an Autism Support teacher, I recognize the dire importance of helping people understand what Autism is and isn't, not only this month, but as often as I possibly can. Did you know that 1 in 88 children are affected with Autism (1 in 54 boys) and that it affects 2 million people in the US alone? Of the $30.86 BILLION dollars allotted to the National Institutes of Health in 2012, only $169 million went directly to research on Autism. Further proof that education and awareness are key!

My students never cease to amaze me on a regular basis, and I am so fortunate to be their teacher. I feel it is our job to speak out for these individuals, particularly for those that cannot do so for themselves!

 To celebrate Autism Awareness month, my students created these puzzle piece wreaths. Autism is represented by puzzle pieces to highlight the puzzle that is the disorder and to honor those working tirelessly to piece things together to determine possible causes, prevention, and methods of treatment.  Here are the steps we took to create these awesome decorations that I will hang proudly in my classroom and home in honor of these incredible individuals.

Materials:

-cardboard ring (ours were 10" in diameter)
-light blue construction paper
-scissors
-glue
-large puzzle pieces
-red, yellow, green, and blue acrylic paint
-paint brush
-hole punch
-blue ribbon-approx. 6"
-Autism Awareness ribbon (we found ours in the craft section of Wal-Mart)-approx. 8"

Instructions:

1. Trace the cardboard ring onto the light blue, construction paper
2. Cut along the traced lines
3. Glue the light blue ring to the cardboard ring so that the cardboard is not seen
4. Paint the non-printed sides of 10 puzzle pieces and let dry
5. Glue puzzle pieces around the ring
6. After the glue is dry, use the hole punch to make a hole at the top of the ring
7. String the blue ribbon through the hole and tie both sides of the string together
8. Loop the Autism awareness ribbon and glue to the bottom center of the ring

Please take a moment to look through this incredible website and share it with others, because the more educated we become, the closer we get to putting this puzzle together!


Hanging proudly in our school's hallway


Saturday, March 23, 2013

Dry Erase Activity Placemat


Dry erase activity mat on one side

Placemat on the other

   

 With five nieces and nephews, I am well aware of how a trip to a sit-down restaurant of any sort can easily become a parent's worst nightmare if there is nothing for their child to do. Hence, this project, where I have transformed a placemat into a dry erase activity mat and board. Children can fit their favorite activity book, coloring pages, or the activity menus that some restaurants give out inside of the plastic sleeve and use dry erase markers to complete and then reuse them. And in case none of those items are available to you, it can simply be used as a dry erase doodle mat. Oh, and I didn't even mention the best part of this project...it cost me a total of $5 using products found at my local Dollar Tree!!! Love that place!

Materials:

 
-plastic folder-$1





-placemat-$1


-ribbon-$1

-children's activity book-$1



-dry erase markers-$1



-Exacto knife

-glue gun/sticks

-scissors

-1/4" elastic-2 pieces, cut into one 1-1/2" piece and one 2" piece

-paper clips


Instructions:

1. Open the plastic folder and separate the clear plastic from the folder pockets by using an Exacto knife to cut along the middle seam (Note: Don't fret if the middle seam looks a little sloppy or uneven, as you will cover it up eventually!). Discard middle pockets


2. Lay the plastic sheet on top of the placemat and cut off edges of plastic to make the same size


3. Using paper clips, align and clip the plastic sheet and placemat together.  Fold the pieces of elastic in half and paper clip one to each vertical side of the placemat between the two  layers (use picture for reference).


4. Sew layers together along the edge using a zigzag stitch




5. Using a low-temp hot glue gun, glue a piece of ribbon down the center of the plastic seam (Note: Hold the plastic layer away from the placemat so that the layers do not potentially stick together)






A sample of a completed activity
 

Use an extra napkin to easily erase your work!





Bon Appetit!

Dry erase activity mat on one side